Avaya 4602 Administrator's Manual page 38

Configuration Parameters
Table 1: 4602 SIP Telephone Parameters (continued)
Parameter
DTFormat
DtmfMethod
Ethernet2
ForcedLogin
GatewayAddress
HoldRemind
38 4602 SIP Telephone SIP Release 1.2 Administrator's Guide
Value Type Value
1 ASCII Date and time format for LCD:
character 0 = mm/dd/yy hh:mm(a/p)
1 = dd/mm/yy hh:mm(a/p)
2 = mm/dd/yy hh:mm(24-hour time)
3 = dd/mm/yy hh:mm(24-hour time)
1 ASCII 0 = Always use in-band signaling
character (never send 2833)
1 = 2833 by negotiation in SDP
(Session Description Protocol)
2 = 2833 always (ignore SDP)
1 ASCII Status of the second Ethernet
character Interface.
0 = disabled
1 = Auto negotiate
1 ASCII Forces the user to enter a numeric
character extension and password to log in to
the phone. The numeric login and
password are used as the user
name and password with the SIP
registrar. The password
automatically has the string "elite"
appended because many
registrars require a non-numeric
character in the password. If
ForcedLogin is disabled, the
SipName and SipPwd must be
provided via the Web interface or a
Configuration file for the phone to
properly register. Only numeric
extensions and passwords are
allowed.
0 = No Login Required (disabled)
1 = Login Required
In addition, the set keeps the last
valid login and password in
non-volatile memory so that it can
be automatically submitted on a
reboot. If the user logs off the
phone, the non-volatile values are
cleared.
Dotted Gateway address for the
Decimal telephone.
ASCII
1 ASCII If enabled, the Hold reminder tone
character sounds every minute while any call
is in the hold state.
0 = Disabled
1 = Enabled
Default Source(s)
0 CFG,
WEBA,
WEBU
1 CFG,
WEBA
1 CFG,
WEBA
0 CFG,
WEBA
0.0.0.0 DHCP,
MAN,
WEBA
0 CFG,
WEBA,
WEBU
4 of 8