Fax Communications Options - Epson Artisan 837 User Manual

Setting
Auto Reduction
Parent topic:

Fax Communications Options

Set the communication options you want to use for faxing over your phone line.
Setting
DRD
ECM
V.34
Rings to Answer
Options
On
Off
Setting Up Fax Features Using the Product Control Panel
Options
All
Single
Double
Triple
Double & Triple
On
Off
On
Off
1 to 9
Description
Reduces size of incoming faxes to fit on the size of
paper selected as the Paper Size setting.
Prints incoming faxes in original size or on multiple
sheets, if loaded paper size is smaller.
Description
If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number as the
DRD setting so your product can receive faxes on the
correct number of rings. All is the default setting and
works for phone lines that do not use this service.
Turns on Error Correction Mode (ECM) to
automatically request retransmission of faxes
received with detected errors (default setting).
Turns off Error Correction Mode (ECM).
Transmits faxes at 33.6 Kbps (default setting)
Transmits faxes at 14.4 Kbps
Sets the number of rings before your product receives
a fax. The default setting is 4. If Auto Answer is turned
on and an answering machine is connected to the
product, make sure this setting is set higher than the
number of rings your answering machine is set to
answer a call.
165