Epson Artisan 837 User Manual page 24

Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is
not responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your fax and network data and settings.
1. Press the Home button, if necessary.
2. Press the arrow buttons and then select Setup.
3. Press the arrow buttons and then select Wi-Fi/Network Settings.
4. Select Wi-Fi Setup.
You see this screen:
5. Select Wi-Fi Setup Wizard.
Note: If you need to disable the wireless network to set up your product on an Ethernet network,
press the arrow buttons and select Disable Wi-Fi instead. Then follow the instructions on the Start
Here sheet to set up your product on a wired network and install the necessary software from the
product CD. The installer program guides you through network setup.
6. Select the name of your wireless network or enter the name manually.
Note: To enter the wireless network name manually, press the arrow buttons and then select Other
SSIDs. Use the displayed keypad to enter your network name, as described in the next step.
24