Menu: View Stack Status And Configure Stacking - HP Procurve 2650 Management And Configuration Manual

Menu: View Stack Status and Configure Stacking

Using the Menu Interface To View and Configure a
Commander Switch
1. Configure an IP address and subnet mask on the Commander switch.
(See Chapter 7, "Configuring IP Addressing".)
2. Display the Stacking Menu by selecting
Figure 14-5. The Default Stacking Menu
3. Display the Stack Configuration menu by pressing
.
Configuration
Figure 14-6. The Default Stack Configuration Screen
HP Procurve Stack Management
Configuring Stack Management
in the Main Menu.
Stacking
to select Stack
14-13