HP Procurve 2650 Management And Configuration Manual page 389

Remove this Member
from the stack.
Figure 14-34. Example of a Commander and Three Switches in a Stack
CLI for "North Sea"
Stack Member
MAC Address of the
Commander for the
Stack to Which the
"North Sea" Switch
Belongs
Figure 14-35. Example of How To Identify the Commander's MAC Address from a Member Switch
Syntax: [no] stack member <switch-num> mac-address <mac-addr>
Use show stack view to list the stack Members. For example, suppose that you
wanted to use the Commander to remove the "North Sea" Member from the
following stack:
You would then execute this command to remove the "North Sea" switch from
the stack:
where:
• 3 is the "North Sea" Member's switch number (
• is the "North Sea" Member's MAC address
0030c1-7fc700
Using the Member's CLI To Remove the Member from a Stack.
Syntax: no stack join <mac-addr>
To use this method, you need the Commander's MAC address, which is
available using the show stack command in the Member's CLI. For example:
HP Procurve Stack Management
Configuring Stack Management
SN )
14-41