HP Procurve 2650 Management And Configuration Manual page 235

Table 10-2. CDP Neighbors Data
CDP Neighbor Data
Address Type
CDP Cache Address
Software Version
Device Name (ASCII string)
Device MAC Address
Destination Port Number
Source Port Number
Product Name (ASCII string)
Capability Code (Device Type)
Displayed MIB
Neighbors
Table
No Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No Yes
Yes Yes
Yes Yes
(alpha (numeric
character) character)
Displaying CDP Neighbor Data.
Syntax: walkmib CdpCacheEntry
Displays the superset of CDP neighbor held in the MIB.
For example, with two CDP devices connected to ports A1 and A3 on the
switch, you would see a
Configuring for Network Management Applications
Always "1" (IP address only).
IP address of source device.
ASCII String
In HP Procurve switches, this is the value configured for
the System Name parameter.
Included in the Device Name entry.
On the Switches 2650 and 6108 (the receiving device), the
number of the port through which the CDP packet arrived.
On the source (neighbor) device, the number of the port
through which the CDP packet was sent.
Platform name designated by vendor.
1 or R: Router
2: Transparent Bridge
4 or B: Source Route Bridge
8 or S: Switch
16 or H: Host
32 or I: IGMP conditional filtering
64 or r: Repeater
listing similar to this:
walkmib
CDP
10-27