Tagged Vlan - HP Procurve 2650 Management And Configuration Manual

Switch "D":
Port 3 dynamically joins VLANs 22 and 33.
Port 6 dynamically joins VLAN 22 and 33.
Figure 11-25. Example of GVRP Operation
N o t e
For example, in the following figure, Tagged VLAN ports on switch "A" and
switch "C" advertise VLANs 22 and 33 to ports on other GVRP-enabled
switches that can dynamically join the VLANs.
Switch "A"
GVRP On
1 5
Tagged
VLAN 22
Switch "B"
(No GVRP)
Tagged
VLAN 22
A port can learn of a dynamic VLAN through devices that are not aware of
GVRP (Switch "B", above). VLANs must be disabled in GVRP-unaware devices
to allow tagged packets to pass through.
A GVRP-aware port receiving advertisements has these options:
If there is not already a static VLAN with the advertised VID on the
I
receiving port, then dynamically create the VLAN and become a member.
If the switch already has a static VLAN assignment with the same VID as
I
in the advertisement, and the port is configured to Auto for that VLAN,
then the port will dynamically join the VLAN and begin moving that
VLAN's traffic. (For more detail on Auto, see "Per-Port Options for
Dynamic VLAN Advertising and Joining" on page 11-38.)
I Ignore the advertisement for that VID.
Don't participate in that VLAN.
I
Port-Based Virtual LANs (VLANs) and GVRP
Switch "C"
Switch "C":
GVRP On
Port 5 dynamically joins VLAN 22.
Ports 11 and 12 belong to Tagged VLAN 33.
11
Tagged
VLAN 33
12
Switch "D"
GVRP On
3
6
Switch "E":
Port 2 dynamically joins VLANs 22 and 33.
Port 7 dynamically joins VLANs 33 and 22.
2 Switch "E"
GVRP On
7
GVRP
11-35