Gateway Convertible notebook Reference Manual page 96

8
9
10
88
CHAPTER 8: Upgrading Your Notebook
Loosen the six memory bay cover screws that secure
the memory cover. (These screws cannot be removed.)
Remove the memory bay cover. Be careful not to break
off the tabs located on the bottom of the cover. Slide
the cover in the direction shown. If the cover does not
slide easily, wiggle the cover to loosen it
If you are removing a module, gently press outward on
the clip at each end of the memory module until the
module tilts upward.
Clip
Screw
Screw
Screw
Screw
Screw
Screw
Clip