Gateway Convertible notebook Reference Manual page 101

www.gateway.com
13
Remove the four screws that secure the hard drive to
the hard drive bracket.
14
Remove the bracket from the old drive.
15
Insert the new drive into the bracket, label side up, so
the screw holes line up.
16
Replace the four screws that secure the bracket to the
drive.
17
Slide the new hard drive into your convertible
notebook, then replace the screw that secures the hard
drive to your convertible notebook.
18
Replace the hard drive bay cover, then tighten the cover
screws.
19
Insert the main and optional multibay batteries, then
turn your convertible notebook over.
20
Connect the optional port replicator.
-OR-
Connect the power adapter, modem cable, and network
cable, then turn on your convertible notebook.
21
Turn on your notebook, open the DVD drive, insert the
Windows DVD, close the DVD drive, then restart your
notebook.
22
When the prompt "Press any key to boot from CD
or DVD" appears, press any key on your keyboard and
follow the on-screen instructions. As part of the process
you may be prompted to insert your Drivers and
Applications Recovery disc.
23
Reconnect all peripheral devices and replace any PC
cards.
Screw
Screw
Screw
Screw
93