Diamondback 910lc Owner's Manual page 8

Place the unit in an area that will meet minimum clearance requirements:

front & sides = 24 inches
rear = 12 inches.
The unit is intended for indoor use only.

Place the unit on a solid, level surface. Always adjust the leveling feet before using to ensure stability.

Ensure all adjustment knobs and levers are fastened securely before using the unit and after making an adjustment.

 Use the handlebars when stepping on and off the unit.
The unit is heavy. Do not attempt to move alone.

Never operate the unit if it is damaged or broken. Contact your local authorized Diamondback Fitness Dealer for

service.
Please unplug the unit after exercising.

Always unplug the unit from the power source before moving or servicing.

Do not remove the covers or other components. Only Authorized Diamondback Fitness Dealers or Authorized

Technicians should perform service on the unit.
Assembly of Technical Items
Assembly of all Diamondback Fitness products should be performed by a Diamondback Fitness Dealer or Authorized Technician.
A significant amount of technical knowledge is required for the safe and complete assembly of the unit. Many retailers will offer
delivery and assembly as part of the sales agreement. If this unit was sold unassembled (in the carton) and you do not feel you
can perform the assembly successfully, please call the dealer for service. Service calls for improper assembly are not covered by
the Warranty Policy and any associated charges will be the responsibility of the owner.
8