Diamondback 910lc Owner's Manual page 21

Elapsed Time.
accumulate time up to 99 minutes, 59 seconds.
Speed.
Speed is displayed in miles-per-hour from 0.0 to 99.9. SPEED and RPM will alternate every four (4)
seconds as they are displayed in the same field.
RPM.
RPM, or revolutions per minute, is the number of complete pedal rotations a single pedal makes in sixty
(60) seconds. The displayed range is 0 to 999. RPM and SPEED will alternate every four (4) seconds as they are
displayed in the same field.
Distance.
Distance is displayed in miles and will begin to accumulate when the program is launched. The range
of the display will be from 0 minutes, 1 second to 99 minutes, 60 seconds.
Heart Rate.
between 30 BPM and 240 BPM to register. When a heart rate is detected by the console, the heart symbol will
flash. A wireless heart rate transmitter such as the Polar un-coded T31 or T34, is required for the heart rate
monitoring function to operate.
Calories.
The total calories burned since the program launch will be displayed in the Calories field. Speed,
Resistance and Time are all factors that determine the rate at which the calories are burned.
Watts.
Watts is a unit of power that is often tracked during exercise routines to represent the amount of
"work" being generated. While the program is operating, the total Watts generated by the user will be
displayed. If operating a program with a Watt target control, the circle to the left of the Watt value will flash to
indicate that the user is generating a Watt value close to the preset target. The flashing arrows will indicate that the Watt value
is above or below the target.
The Time display field begins to count up as soon as the program is launched. The clock will
The pulse or heart rate will be displayed in beats per minute. The signal has to receive a heart rate
910Ic Owner's Manual
21