Programming - Culligan Total Home Conditioner - Culligan Gold Series Owner's Manual

Gold series automatic water conditioner
Hide thumbs Also See for Gold Series:
Table of Contents

Advertisement

DIP Switch Settings
The circuit board is shipped with all DIP switches in the off position. Prior to programming the
controller some DIP switches may need to be moved to the ON position. Because each switch
serves a specific purpose, please refer the Culligan Gold Series Installation & Operation Manual for
additional information.
Dip Switch – Set dip switches on back of circuit board to the following for the Total Home Water
Conditioner.
1.
Dip switch 4 is "On"
2.
All other dip switch settings should be in the "Off" position.
Programming Menus
A further description of each programming setting and the corresponding display is outlined below.
For a display that has an icon that is displayed solid for the 2 second time period prior to bringing
up the settings, the settings menu can be reached prior to the two second time out by pressing the
"Up" or "Down" key.
1.
Beeper Setting - This setting is used to turn the beeper on
or off for each key press actuation. The display will show
"bEEP X" where X is either "Y" or "N". The "Y" or "N"
will be toggled with the "Up" and "Down" keys. Setting
the Beep option to "N" will only disable the beeper for key
press actuation. The beeper will still be active for error and
alarm codes.
Pressing the "Program" key will save the setting and move
to the next programming step.
2.
Time of Day - This setting is used to program the current time of day. When in this step the
display will first show "tod" for two seconds.
After "tod" is displayed, "12:00 PM" will display (or the current set time if already programmed)
and the minutes will flash. The minutes are adjusted with the "Up" or "Down" key until the
correct value is displayed.
Press the "Regen" key to flash the hours. Adjust with the "Up" or "Down" key until the correct
time is displayed.
Pressing the "Program" key will save setting and move to the next programming step. Pressing
"Regen" will move back to the minutes adjust.
Minutes Flashing
Hours Flashing
Programming
Culligan Total
Home
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gold 9"Gold 10"Gold 12"Gold 14"

Table of Contents