Regeneration
There are several conditions that will cause the control to trip a regeneration. The "REGEN"
enunciator will light when the control has signaled for a regeneration. The "REGEN" enunciator will
flash while the control is in regeneration. The following are conditions that will call for regeneration:
1
When the Soft-Minder
®
2
When the Aqua-Sensor
®
3
At the preset time, when the number of days without a regeneration is equal to the Timeclock
Backup setting.
4
At the preset time, when the "REGEN" button is depressed once. "REGEN" will light.
5
Immediately, when the "REGEN" button is depressed for three seconds. "REGEN" will light and
blink.
6
Immediately, if power to the unit has been off for more than 3 hours and time of day has been
restored.
meter has recorded the passage of a predetermined number of gallons.
Probe senses the hardness in the Cullex Media.
Final Start-Up
33