Monogramming; Function Keys - Janome Memory Craft 15000 Instruction Manual

q
w
e
r
t
y
o !0
u
i
!1 !2

Monogramming

You can program letters and symbol designs for
monogramming.
Press the home key to enter the category selection.
Press the monogramming icon to enter the
monogramming mode (refer to page 26).
Press the font selection key and the font selection
window will open.
q Font selection key
You can select one of 5 fonts.
Select the desired font by pressing the corresponding
key.
w Block font key
e Script font key
r Broadway font key
t Symbol key
y Block font (9 mm) key
The monogram mode window will open.
NOTE:
• The height of Block font (9 mm) is approximately 9
mm.
• If you select Russian language for the visual touch
screen, you can select Cyrillic alphabets in Gothic
font as well.

Function keys

u Cursor key
Press the cursor key to move the cursor up or down.
i Letter size key
Press this key to select the full size (L) or small size (S).
o Letter case key
Press this key to select the upper case or lower case.
!0 Delete key
Press this key to delete the selected character or symbol
(refer to page 65).
!1 Memory check key
Press this key to view the entire monogram (refer to page
64).
!2 File save key
Press this key to save the monogram as a data file (refer
to page 71).
NOTE:
Numbers, symbols and European letters are available
on pages 2/5 through 5/5.
68