Trace Key; Hoop Back Key - Janome Memory Craft 15000 Instruction Manual

q
1
2
w
3

Trace key

You can check the size of the embroidery area by tracing
the pattern outline without stitching or with basting
stitches.
Press the trace key and the trace option window will
open.
q Trace key
The following 3 options are available:
1. Trace without stitching
Press the key to open the trace without stitching
window.
Press the trace key
the keys to move the hoop to a corner.
2. Trace and baste (single)
Press the key to open the trace and baste (single)
window.
Press the start/stop button to start tracing with basting
stitches.
3. Trace and baste (double)
Press the key to open the trace and baste (double)
window.
Press the start/stop button to start tracing with basting
stitches. First, the machine bastes inside the pattern then
traces the pattern outline with basting stitches.
NOTE:
The machine will baste around the embroidery area
with a 5 mm allowance.
However, the allowance will be null if the pattern
spreads over the maximum limit of embroidery area.
To close the tracing option window, press the X key.

Hoop back key

Raise the needle by pressing the needle up/down key, if
the needle is in down position.
Press the hoop back key w and hoop back option
window will open.
Press the key and the confirmation window open.
Press the OK to move the carriage back to the home
position and return to the Ready to Sew screen. Press
one of the keys to move the carriage to a
standby position.
Press the X key to close the hoop back option window.
w Hoop back key
The hoop will go back to the original position when
pressing the start/stop button.
122
to start tracing or press one of