Sewing The Border Design; Eliminating Blank Margin - Janome Memory Craft 15000 Instruction Manual

Sewing the border design

Print the template sheet and place it at the center of the
upper edge of the quilt.
Mark the end points of the centerlines. Draw the
centerlines on the quilt. The horizontal line should be as
long as the overall quilt width.
Place the quilt on hoop ASQ22 and adjust the position
by aligning the centerlines on the quilt and the AcuFil
template. Sew the first section.
Place the template sheet at the next section and draw the
vertical centerline. Sew the next section and repeat these
steps to sew the remaining sections from the center
outward.

Eliminating blank margin

If the design pattern created in the previous section is
smaller than the calculated design size, there will be a
blank margin around the design.
The blank margin can be eliminated by adjusting the
working area.
Open a 220 x 220 working area and import the created
design.
Adjust the working area size by dragging anchor points to
eliminate the blank margin.
Save the design as a file.
151