Starting To Sew Embroidery - Janome Memory Craft 15000 Instruction Manual

z
q
x
c
w
e

Starting to Sew Embroidery

z Select the desired pattern.
x Adjust the hoop position with the jog keys so that the
needle position comes right above the center of the
centerlines on the fabric.
q Jog key
c Press the start/stop button and sew 5 to 6 stitches.
Press the start/stop button again to stop the machine.
The presser foot will be raised automatically.
Cut the loose thread close to the beginning of the
starting point.
w Loose thread
Press the start/stop button to start sewing again.
The machine will stop (and trim the threads if the auto
thread cutting is activated) automatically when the
first color section is finished.
Change the thread to the next color and sew the next
section.
Sewing results
The embroidery pattern is sewn against the centerlines
on the fabric as shown.
e Centerlines on the fabric
NOTE:
Refer to page 153 for how to set auto thread cutting.
124