Starting To Sew Embroidery - Janome Memory Craft 400E Instruction Book

q
z
x
c
e
r

Starting to Sew Embroidery

z Select the desired pattern.
Press the thread color/Jog key q. The jog keys
appear.
w
x Adjust the hoop position with the jog keys so that the
needle position comes right above the center of the
centerlines on the fabric.
w Jog keys
c Press the start/stop button and sew 5 to 6 stitches.
Press the start/stop button again to stop the machine.
Cut the loose thread close to the beginning of the
starting point.
e Loose thread
Press the start/stop button to start sewing again.
The machine will stop (and trim the threads if the auto
thread cutting is activated) automatically when the first
color section is finished.
Change the thread to the next color and sew the next
section.
You can adjust the sewing position with the jog keys
during the sewing if necessary.
Press the start/stop button to stop the machine.
Press the jog keys to move the hoop at the desired
position. Press the start/stop button again to continue
sewing.
NOTE:
The needle drop position will resume the original
position after all the color sections are finished.
Sewing results
The embroidery pattern is sewn against the centerlines
on the fabric as shown.
r Centerlines on the fabric
NOTE:
Refer to page 53 for how to set auto thread cutting.
32