Status - Cisco Small Business WAP44 Administration Manual

Setting Up the Cisco WAP4410N Wireless-N Access Point
Navigating the Utility
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide
• Log—Configures the log settings.
• Diagnostics—Allows you to perform diagnostic activities, which can be
useful in solving network problems.
• Factory Default—Resets the access point to its factory default settings.
• Firmware Upgrade—Upgrades the access point's firmware on this screen.
• Reboot—Reboots the access point.
• Configuration
configuration.
• SSL Certification

Status

This page allows you to view status information about your local network, wireless
networks, and network performance.
• Local Network—Displays system information, including software and
hardware versions, MAC address, and IP address on the LAN side of the
access point.
• Wireless—Displays wireless network settings including SSID, network
mode, priority setting, VLAN trunk, and wireless channel.
• System Performance—Displays the current traffic statistics of this access
point for both wireless and LAN ports.
Management—Saves and restores access point
Management—Exports or installs an SSL Certificate.
5
22