Cisco Small Business WAP44 Administration Manual page 32

Configuring the Cisco WAP4410N Wireless-N Access Point
Wireless
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide
• Key Renewal—Enter a key renewal timeout period, which instructs the
access point how often it should change the encryption keys. The default is
3600 seconds.
Click Save.
Configuring WPA2-Personal Mixed
This security mode supports the transition from WPA-Personal to WPA2-Personal.
You can have client devices that use either WPA-Personal or WPA2-Personal. The
access point will automatically choose the encryption algorithm used by each
client device. To enable wireless WPA2-Personal Mixed security, follow these
steps:
Click Wireless > Security.
From the Security Mode drop-down menu, select WPA2-Personal Mixed.
To enable wireless isolation within the SSID, click Enabled.
Provide the following information:
• WPA Algorithms—(Read-only) The WPA2-Personal Mixed security mode
automatically chooses TKIP or AES for data encryption.
• Pre-Shared Key—Enter a WPA Shared Key of 8–63 characters.
• Key Renewal—Enter a key renewal timeout period, which instructs the
access point how often it should change the encryption keys. The default is
3600 seconds.
Click Save.
6
32