Cisco Small Business WAP44 Administration Manual page 35

Configuring the Cisco WAP4410N Wireless-N Access Point
Wireless
!
CAUTION
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide
Configuring WPA2-Enterprise Mixed
This security mode supports the transition from WPA-Enterprise to WPA2-
Enterprise. You can have client devices that use either WPA-Enterprise or WPA2-
Enterprise. The access point will automatically choose the encryption algorithm
used by each client device.
Use this mode only when a RADIUS server is connected to the access point.
To enable wireless WPA2-Enterprise Mixed security, follow these steps:
Click Wireless > Security.
From the Security Mode drop-down menu, select WPA2-Enterprise Mixed.
To enable wireless isolation within the SSID, click Enabled.
Provide the following information:
• Primary/Backup RADIUS Server—Enter the IP address of the RADIUS
server. The Backup Radius server is used only if the primary server is
unavailable.
• Primary/Backup RADIUS Server Port—Enter the port number used by
the RADIUS server. The default is 1812. The backup Radius server is used
only if the primary server is unavailable.
• Primary/Backup Shared Secret—Enter the Shared Secret key used by the
access point and RADIUS server. The backup Radius server is used only if
the primary server is unavailable.
• WPA Algorithms—WPA offers you two encryption methods, TKIP and AES
for data encryption. Select one of these algorithms. The default is TKIP.
• Key Renewal Timeout—Enter a key renewal timeout period, which
instructs the access point how often it should change the encryption keys.
The default is 3600 seconds.
Click Save.
6
35