HoMedics BPA-101 Manual page 11

BPA-101IB_ENGSP.qxd 10/24/05
1. Press the User Select Button to choose User 1
or User 2.
After the user number is selected, press the
START/STOP button to confirm the chosen user.
2. With the cuff wrapped around your arm, press the
START/STOP button. Do not inflate the cuff unless it
is wrapped around your arm. All digits will light up to
check the display functions. The checking procedure
will be completed after about 2 seconds.
START
STOP
11:00 AM Page 19
OR
19
3. After all symbols disappear, the display will show a
blinking "0". The monitor is "Ready to Measure"
and will automatically inflate the cuff to start
measurement.
Note: This monitor will re-inflate automatically if the system detects
that your body requires more pressure for measurement.
4. When the measurement is completed, the cuff
will deflate. Systolic pressure, diastolic pressure
and pulse will be shown simultaneously on the
LCD screen. The measurement
is then automatically stored
into memory.
20