ZyXEL Communications P-660R-Tx Series Support Notes page 31

P-660R-Tx Series Support Note s
1
Since SUA enables your LAN to appear as a single computer to the Internet, it
is not possible to configure similar servers on the same LAN behind SUA.
2
Because White Pine Cu-SeeMe uses dedicate ports (port 7648 & port 24032) to
transmit and receive data, therefore only one local Cu-SeeMe is allowed within the
same LAN.
Configurations
For example, if the workstation operating Cu-SeeMe has an IP of 192.168.1.33,
then the default SUA server must be set to 192.168.1.33. The peer Cu-SeeMe
user can reach this workstation by using P-660R-Tx's WAN IP address which
can be obtained from Web Configurator, Status -> Device Info ->WAN.
31
All contents copyright © 2010 ZyXEL Communications Corporation.