ZyXEL Communications P-660R-Tx Series Support Notes page 12

Key setting:
Field Description
Choose one of encapsulation mode used in Dynamic IP condition .There
Encapsulation are four modes: 1483 Bridged IP LLC, 1483 Bridge IP VC-Mux, 1483
Route IP LLC(IPoA),and 1483 Route IP VC -Mux.
When activated, not only Router connects but bridge connects. Meanwhile,
Bridge Router and Bridge use the same PVC, Lan PC could get an wan IP which is
Interface
assigned by PPPOE server. So we needn‟t two PVCs to do multicast.
NAT Choose to enable or disable NAT function.
Choose "yes" to set the current PVC as a default gateway to internet from
your device. Note that there must be only
Default Route
have configured more than one PVC as default gateway, the last one
would be efficient.
TCP MTU
Set TCP MTU value. "0" is considered as default value.
Option
Dynamic Draw out the list to choose an RIP vision. And you can choose the RIP
Route direction. Choose none direction to disable RIP function.
Multicast Choose to enable or disable multicast function
MAC Choose to enable Mac spoofing function. You can set a wanted MAC
Spoofing below
All contents copyright © 2010 ZyXEL Communications Corporation.
P-660R-Tx Series Support Note s
one default gateway. If you
12