Unit Accessories - Trane HUV Installation Operation & Maintenance

Shelving
Trane's classroom shelving is
composed of four different styles.
These styles include:
• A shelving unit (open or
closed)
• A piping compartment
• A cut-to-fit-filler
• Formica® laminate tops
The shelving unit(s) are made of
16-gauge paint grip galvanized
steel. Each piece is finished with a
baked-on, industrial grade powder
paint with a coordinating selection
of colors to match the classroom
unit ventilator. All selections are
equipped with leveling legs for
proper mating to the classroom
unit ventilator. For units that in-
clude the dynamic air option, a
floor spacer will be installed at the
back of the shelving unit in order
to block air flow under the unit.
See shelving model number, page
51 for complete selection.
The Formica top is a 1-inch particle
board, finished with a choice of
Formica laminate to compliment
and coordinate with the finish
available on the metal shelving
units. The laminate is available in
sectional or continuous lengths for
an esthetically pleasing appear-
ance.
Each shelving component ships
from the factory with a standard
set of installation hardware to help
minimize the need for field sup-
plied components. Note: See
shelving installation instructions
UV-SVN001-EN for more informa-
tion.
126
Accessories
Shelving
Open Shelving
The open shelving design is avail-
able in 2, 3, 4 and 5-feet lengths.
Shelving depth includes 15 1/4-
inch or 21 1/4-inch. The units are
equipped with adjustable shelves
that are reinforced with a formed
channel for maximum strength.
Closed Shelving
The closed shelving design is avail-
able in 3, 4 and 5-feet lengths.
Shelving depth includes 15 1/4-
inch or 21 1/4-inch. The units are
equipped with adjustable shelves
that are reinforced with a formed
channel for maximum strength.
Closed shelving doors are
equipped with two locks as stan-
dard.
Cut-to-Fit Filler
The cut-to-fit filler piece may be ap-
plied to fit smaller spaces. The filler
is available in an 18-inch or 36-inch
length, but may be cut-to-fit an
area as small as 4-inches. The fill-in
section has a removable front pan-
el to allow access to piping or elec-
trical connections.
Piping Compartment
The piping compartment shelving
is manufactured from 18-gauge
cabinet steel and painted in deco-
rator colors. The compartment is
equipped with a metal top, leveling
legs and a locking front panel. It is
a standalone piece that is best suit-
ed for housing piping equipment
for units.
Formica Laminate Top
The laminate top selection is avail-
able in 12-decorator colors. It may
be cut-to-fit the shelving selection,
or ordered as a standalone piece
(up to 12-feet). The laminate top is
available with or without a grille.
UV-PRC001-EN