Advertisement
Available languages
Available languages
3
CMS
Table 3-13: FX Control Setup parameter
Parameter
Description
Footswitch Ctrl.
Select FX 1, FX 2 or FX 1+2 to control one or both effect
units using a footswitch.
TAP Button Ctrl.
Select FX 1, FX 2 or FX 1+2 to control the delay time of
one or both effect units using the TAP button.
FX1 Start Preset
Number of effect loaded after power on in effect unit FX 1
FX2 Start Preset
Number of effect loaded after power on in effect unit FX 2
FX1 MIDI Channel
Select the channel (1 to 16) to be used for controlling the
FX 1 effect unit via MIDI. Select Omni if commands from
all channels should be accepted. Select Off if the effect
unit should not be controlled via MIDI.
HINT:
Select different MIDI channels for effect
units FX 1 and FX 2 to control them inde-
pendently with a programmable foot-
switch.
FX2 MIDI Channel
Select the channel (1 to 16) to be used for controlling the
FX 2 effect unit via MIDI. Select Omni if commands from
all channels should be accepted. Select Off if the effect
unit should not be controlled via MIDI.
HINT:
Select different MIDI channels for effect
units FX 1 and FX 2 to control them inde-
pendently with a programmable foot-
switch.
MIDI PrgCh Count
Select the setting 0 - 127 if using MIDI devices that start
counting program change commands from 0. Select the
setting 1 - 128 if using MIDI devices that start counting
program change commands from 1.
Turn the MENU/ENTER rotary encoder to highlight an en-
try in the left column of the FX Control Setup dialog.
Press the MENU/ENTER rotary encoder to select the cor-
responding value in the right column. Now turn the
MENU/ENTER rotary encoder to edit the value and press
the MENU/ENTER rotary encoder again to apply the new
value. Table 3-16 lists the entries of the FX Control Setup
dialog. Pressing the BACK function key returns to the
menu. Pressing the ESC function key returns to effect
mode.
D
S
EVICE
ETUP
This dialog can be used for editing system parameters
and checking system properties. Some menu entries (e.g.
Display Brightness) can be edited in the Device Settings
dialog after pressing the MENU/ENTER rotary encoder.
Other entries (e.g. Firmware Info) will open another dia-
log when pressing the MENU/ENTER rotary encoder.
Illustration 3-14: Device Setup dialog
Device Setup
Display Brightness
Screensaver
Personalize
Show Device Name
Display Brightness
The currently set display brightness (from 0% to 100%) is
indicated in the right column. Press the MENU/ENTER ro-
tary encoder to edit the value. Turn the MENU/ENTER ro-
tary encoder to the left to decrease the display
brightness. Turn the MENU/ENTER rotary encoder to the
right to increase the display brightness. Press the MENU/
24
100%
Off
ENTER
Off
BACK
ESC
ENTER rotary encoder to apply the selected brightness.
Pressing the BACK function key returns to the menu.
Pressing the ESC function key returns to effect mode.
Screensaver
The currently set screensaver time interval is shown. Af-
ter the time interval (from 10 seconds to 60 minutes) has
expired the screensaver is activated. Press the MENU/EN-
TER rotary encoder to edit the value. Turn the MENU/EN-
TER rotary encoder to the left to shorten the time
interval, or deactivate the screensaver by selecting Off.
Turn the MENU/ENTER rotary encoder to the right to ex-
tend the time interval. Press the MENU/ENTER rotary en-
coder to apply the selected setting. Pressing the BACK
function key returns to the menu. Pressing the ESC func-
tion key returns to effect mode.
Personalize
Press the MENU/ENTER rotary encoder to open the Set
Device Name dialog. This dialog is used to change the
CMS's name, which can be composed of a maximum of
18 symbols and consist of all letters A-Z, a-z, the numbers
0-9 and special characters.
Turn the MENU/ENTER rotary encoder to the left or right
to edit the highlighted character. Pressing the MENU/EN-
TER rotary encoder accepts the desired symbol and
moves the cursor to the next character. Move the cursor
to the left or to the right by pressing the
keys. Select the
symbol or press the OK function key to
quit editing the name.
Pressing the BACK function key returns to the menu.
Pressing the ESC function returns to effect mode.
Show Device Name
Press the MENU/ENTER rotary encoder to edit the set-
ting. Select „On" if the device name should be indicated
in the display. If „Off" is selected the name is not indicat-
ed. Press the MENU/ENTER rotary encoder to apply the
selected setting.
Play 11-12 at STDBY
Select „enable" if input 11-12 (CD 3-4) should be used for
playback of background music in STANDBY mode.
HINT: If Play 11-12 at STDBY is enabled a confirmation
prompt appears in the display when activating
STANDBY mode. Press the MENU/ENTER rotary
encoder to confirm.
If „disable" is selected the signal received via input 11-12
is muted in STANDBY mode. Pressing the BACK function
key returns to the menu. Pressing the ESC function key
returns to effect mode.
Factory Reset
The CMS can be reset to factory settings. Pressing the
MENU/ENTER rotary encoder opens a clear user FX dialog
box that lets the user choose between YES or NO by turn-
ing the MENU/ENTER rotary encoder. Select YES if all
user effects should be cleared. Select NO if the user ef-
fects should not be cleared. Pressing the MENU/ENTER
rotary encoder opens a safety dialog box „Are you sure?"
that lets the user choose between YES or NO by turning
the MENU/ENTER rotary encoder. If YES has been select-
or
function
Hide quick links:
Advertisement
Chapters
