Back Panel Description - Krell Industries PHANTOM User Manual

Back Panel Description

See Figure 3 on the previous page
The preamplifier back panel provides all input and output connections, remote
control inputs and outputs, and the power connection. Back panel features and
their descriptions follow.
Inputs
15 Balanced Inputs: B-1, B-2
These are balanced analog source inputs with XLR connectors.
16 Single-ended Inputs: S-1, S-2, S-3
These are single-ended analog source inputs with RCA connectors.
17 Tape Input
This is a single-ended tape input, for use with a tape source.
18 C-1 and C-2 CAST Inputs
These are CAST inputs with 4-pin bayonet connectors, for use with Krell
CAST-equipped input devices.
Outputs
19 Tape Output
This single-ended analog output is used for recording the selected input
source.
20 Main Outputs
The Phantom is equipped with one single-ended output with RCA connectors,
one balanced output with XLR connectors, and two CAST preamplifier outputs
with 4-pin bayonet connectors, for use with Krell CAST-equipped amplifiers.
2 2 1 1 S S u u b b w w o o o o f f e e r r
The Phantom is equipped with one balanced XLR and one single-ended RCA
subwoofer output pair. Note: These outputs are only active when the Phantom
is equipped with the optional crossover board.
Configurations
22 CAN Link
These RJ-45 link connectors are connected in parallel. They are used to con-
nect the Phantom preamplifier to other CAN Link-enabled Krell products.
24
continued