Back Panel Description - Krell Industries KAV-280p Instructions For Use Manual

Back Panel Description

See Figure 2 on page 8
Back Panel
Functions
ANALOG INPUTS
ANALOG OUTPUTS
BACK PANEL REMOTE
CONNECTIONS
Krell KAV–280p
The KAV–280p back panel provides connections for all inputs and
outputs, power on/off, and additional remote connections.
12 Left and Right Balanced Analog Inputs
The KAV–280p is equipped with one pair of balanced (B-1) inputs
via XLR connectors.
13 Left and Right Single-ended Analog Inputs
The KAV–280p is equipped with three pairs of single-ended (S-1,
S-2, or S-3) inputs via RCA connectors.
14 Left and Right Tape Inputs
The KAV–280p is equipped with a pair of single-ended tape inputs
via RCA connectors.
15 Left and Right Tape Outputs
The KAV–280p is equipped with a pair of single-ended tape
outputs via RCA connectors.
16 Left and Right Single-ended Outputs
The KAV–280p is equipped with a pair of single-ended preamplifier
outputs.
17 Left and Right Balanced Outputs
The KAV–280p is equipped with a pair of balanced preamplifier
outputs.
17 12 VDC Out
The KAV–280p is equipped with an output that sends 12 VDC
(12 V trigger) power on/off signals to other Krell components and
other devices that incorporate a 12 V trigger. This allows you to
turn other components on or off, or to and from stand-by, from the
KAV–280p. When the KAV–280p is switched between stand-by
and operate, it sends a signal from the 12 VDC Out that will switch
other components, allowing whole systems or parts of systems to
be easily coordinated.
9