Remote Control Description; Battery Installation And Removal; Amplifier Functions - Krell Industries PHANTOM User Manual

Phantom stereo preamplifier

Table of Contents

(SECTION FOUR: Anatomy of an Phantom continued)

Remote Control Description

See Figure 2 on the previous page

The Phantom remote provides the same power, preamplifier, level control, and

navigate/customize functions as the preamplifier's front panel. In addition, the

remote has CD and DVD functions, and menu configuration functions.

Keys Labled 1 to 14

These remote keys have the same function (and callout number) as the

corresponding front panel controls described in the preceding pages.

Keys Labled A to J

These remote keys have functions that are unique to the remote control,

and are described below.

The remote control uses 2 AAA-size 1.5 Volt batteries. Batteries are included

with the shipment. To install the batteries:

Remove the remote control backplate, using the supplied T-10 Torx

wrench.

Install the batteries, following the battery position diagram on the plastic

battery receptacle.

Replace and secure the backplate.

Notes

Replace batteries when remote control function becomes intermittent.

Remove batteries if the remote control is not used for a long period of time. Battery

leakage can damage the remote control.

A Amp Pwr Key

Use this key to activate Krell amplifiers connected to your system.

B Sel (Meter Select) Key

Use this key to select the meter range of the power meter scale on the

front of a Krell Evolution One power amplifier. Please refer to the Evolution

One Owner's Reference, for more information.

Table of Contents

Table of Contents