Back Panel Description - Krell Industries S-1500 Instructions For Use Manual

Back Panel Description

See Figure 2 on page 9
BALANCED INPUTS
SINGLE-ENDED
INPUTS
IMPORTANT
AMPLIFIER CHANNEL
OUTPUTS
IMPORTANT
BACK PANEL REMOTE
CONNECTIONS
Notes
Krell S–1500 Multi-channel Amplifier
The S–1500 Multi-channel Amplifier back panel provides connec-
tions for all inputs and outputs, remote connection input and out-
put links, and the AC power supply.
3 Inputs 1-7
The S–1500 amplifier has seven channel inputs for output devices
with balanced XLR connectors.
4 Inputs 1-7
The S–1500 amplifier has seven channel inputs for output devices
with single-ended RCA connectors.
Use only one input to each amplifier channel at a time. You may use
the balanced inputs for some of the amplifier channels and the
single-ended inputs for the remaining channels.
5 Outputs 1-7
The S–1500 amplifier has seven amplifier channel outputs. The
loudspeaker binding post terminals accept spade lugs, bare wire,
or pins. Use the red terminal for the positive connection and the
black terminal for the negative connection.
Tighten loudspeaker binding posts by hand only.
6 12 VDC Remote Power Out
The S–1500 amplifier is equipped with an output that sends 12 VDC
power on/off (12 V trigger) signals to other Krell components and
other devices that incorporate a 12 V trigger.
When the component is in the operational mode, the 12 VDC Out pro-
vides 12 V of DC output. When the component is in the stand-by mode
or off, the DC output is 0 V.
12 VDC Out (12 V trigger) current is limited to 30 mA.
11