Volume Display; High Pass And Low Pass - Krell Industries PHANTOM User Manual

(SECTION SEVEN: Customizing the Phantom continued)

Volume Display

High Pass and Low Pass

5 Menu Button or Key
Enter or exit the menu.
14 Volume Knob
or Level Keys
Navigate the menu hierarchy;
review functions and configu-
ration options.
6 Enter Button or Key
Select a configuration option;
confirm a selection.
BACK
Scroll backwards through the
menu hierarchy; exit a menu
option without confirming it.
This function enables you to select the numeric mode for the volume display, dis-
playing values from softest to loudest: 0 to 151. Alternatively, you can select the
dB mode for the volume display, displaying values from softest to loudest: -inf to
+12 dB. The options are:
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
2.
Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control The front panel display (3) shows the default mode:
.
3.
Use the level control knob or the up and down keys to select the desired
option: or
NUMERIC dB.
4.
Press the enter button or key to confirm the selection. The front panel display
reads:
VOLUME DISPLAY.
When the optional crossover board is installed, crossover parameters may be set
for both high pass ansd low pass filters. High pass signals are fed to the main
Phantom outputs (20). Low pass signals are fed to the subwoofer outputs (21).
The options are:
HIGH PASS, LOW PASS, FREQUENCY, 40Hz, 55Hz, 75Hz, 100Hz, BYPASS, FILTER,
BUTTERWORTH, 12dB, 18dB, 24dB, or 24dB Linwitz-Riley.
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
2.
Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control The display (3) shows
.
3.
Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control. The front panel display (3) shows the default frequency:
.
BYPASS
4.
Use the level control knob or up and down keys to select the desired frequen-
cy:
BYPASS, 40HZ, 55Hz, 75Hz, 100HZ
5.
Press the enter button of key. The display (3) shows:
6.
Press the enter button or key. The display (3) shows the default slope and filter
type:
12dB BUTTERWORTH.
7.
Use the control knob or the up and down keys to select the desired option:
12dB BUTTERWORTH, 18dB BUTTERWORTH, 24db BUTTERWORTH, 24dB LINKWITZ-RILEY.
NUMERIC, dB.
VOLUME DISPLAY.
HIGH PASS FILTER.
FREQUENCY
.
44
.
dB
.
SLOPE
continued