Changing The Name Of The Device; Changing The Device To Use While Connecting Over Two Same Type Devices - JVC GV-DS2 Instructions Manual

Changing the name of the device

ACCESS "NAME CHANGE"
1
DIALOG BOX
Choose "Name Change" from "Set-up"
on the JLIP VIDEO PRODUCER window.
•The "Name Change" dialog box
appears.
SELECT DEVICE
2
Click on the name of the device and
"CHANGE".
•The dialog box to enter new name of
the device appears.
ENTER NEW NAME
3
SET NEW NAME
4
Click "OK".
•The message "Device name will be
changed." appears.
Clicking "OK" again sets that device
name and brings up the "Name
Change" dialog box.
RETURN TO VIDEO PRODUCER
5
WINDOW
Click "CLOSE".
Name Change
Select the device to change.
VCR
06:VCRCAMERA
VIDEO PRINTER
Name Change
Enter new name (up to 20 letters).
=
06 VCRCAMERA (1)
OK
CHANGE CLOSE
CHANGE
CANCEL
Changing the device to use while
connecting over two same type
devices
ACCESS "DEVICE SELECTION"
1
DIALOG BOX
Choose "Device Change" from "Set-up"
on the JLIP VIDEO PRODUCER window.
•The "Device Selection" dialog box
appears.
SELECT DEVICE
2
Click on the name of the device and
"OK".
NOTE:
It is impossible to use two same type devices
simultaneously.
Device Selection
Select Devices to control.
VCR
DISCONNECT
06:VCRCAMERA (1)
07:VCRCAMERA (2)
VIDEO PRINTER
DISCONNECT
67
EN
OK
CANCEL