Getting Started; Operating Environment; Connectable Devices - JVC GV-DS2 Instructions Manual

18
EN
Video capture software is a type of application program that allows you to capture video
images from camcorders and VCRs and store them in personal computers running under the
Windows operating system. These images can be transferred from the video source to the
computer via a standard RS-232C communication interface. By processing the captured
images with commercially available image editing software, you can create your own unique
and highly personal illustrations and graphics for incorporation into everything from postcards
to newsletters and Internet homepages.
JLIP* stands for Joint Level Interface Protocol, a new communication protocol which allows AV
units equipped with a JLIP terminal to be controlled by a personal computer.
* is a registered trademark of JVC.
Personal computer with Microsoft Windows 3.1 or Windows 95
CPU Intel DX4 or faster processor
Minimum RAM requirement: 8 MB
Available Hard Disk space of at least 8 MB
Color display capable of at least 640 x 480 pixels, 256 colors
Recommended 1024 x 768, 16.77 Mil colors
1 free serial transmission port, compatible with 9600 bps transmission rate, connectable to
RS-232C with 9 pin serial connector.
Recommended compatible with UART 16550A
Mouse (Windows compatible)
CD-ROM drive
Note : An optional 9 pin serial conversion adapter is required for computers using serial
communication port other than standard 9 pin.
* Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
* Other product and company names included in this instruction manual are trademarks and/or registered
trademarks of their respective holders.
GR-DVXU series
The JLIP Video Capture Software can be used with the GV-CB1U and GV-DS1U.
What is video capture software ?
What is JLIP ?

Operating Environment

Connectable Devices

GETTING STARTED