Troubleshooting; Troubleshooting - JVC GV-DS2 Instructions Manual

40
EN
NOTE : External noise or disturbance may interfere with the microprocessors built into the
JLIP Video Capture Docking Station. If this happens, turn the power off and then turn
it on again.
Problem
JLIP Video Capture Software
does not work.
Operating the camcorder
(capturing video images
through the computer etc.)
is not possible.
No effect when clicking the
Input Select/Memory
buttons.
The video unit does not
operate when "Window" —
"VCR" in the menu bar and
"VCR" in the "VCR"
operation window are
clicked.
The "VCR" operation
window display shows a
different operation from
what the video unit is
actually doing.
On-screen display of video
unit is not stored in
memory.
Counter display appears in
the image display box even
when there is no tape in the
video unit.
Cause
Does the JLIP Video Producer Software or
the JLIP Movie Player Software run ? The
JLIP Video Capture Software cannot run
together with it.
If the camcorder is attached to the JLIP
Video Capture Docking Station with the
battery pack installed or with the AC Power
Adapter/Charger attached, it is impossible to
operate the camcorder using the computer.
These buttons do not function.
The counter display in the "VCR" operation
window turns blue.
Is your video unit compatible with JLIP ?
Only JLIP-compatible units can be operated.
If you are using a JLIP-compatible unit and
it still won't work, check to make sure that
it is correctly connected.
Is the video unit selected in "Select Unit" ?
Select correctly.
Initialize JLIP.
Make sure the video unit is turned on.
Slow Play in the VCR operation window
automatically switches to Play after
approximately 10 to 20 seconds.
In some cases, the video unit may continue
slow-motion playback even when the
"VCR" operation window changes from
Slow Play to Play. Check your video unit's
instruction manual for details.
It is not possible to capture the on-screen
display (date, time cord etc.) into the
computer.
When capture video data from a powered-
on camcorder with no tape loaded, a
counter display may appear in the image
display box. Images corresponding to the
displayed counter number can no longer be
caputred.

TROUBLESHOOTING

Page
—
—
—
27
14 – 16
23
22
27
—
—