JVC GV-DS2 Instructions Manual page 31

VCR
I
00:01:23:12F
4
5
6
Capture
Transfer
7
8
1. The message "Index No.1 being scanned"
2. The message "No.1 index image being
3. The images captured in step 7 are scanned
Click "Window" — "VCR" to call up the
VCR Operation window.
Operate the video source unit via the
VCR Operation window.
Click the "Capture" button on the
desired video image, and index image
data (80 x 60 pixels) is transferred to the
computer.
•The message "No.1 index image being
transferred" appears during data
transmission.
Repeat steps 4 through 6 as necessary.
Click "Transfer" button.
•If you want to capture full image data
(640 x 480 pixels) after capturing the
"Index Image" in step 2, click "Index &
Full Image" and then click the
"Transfer" button.
appears while the video source unit is
scanning the picture to be captured.
transferred" appears. When you select
"Index & Full Image" in step 2, the
message "No.1 image being transferred"
appears while the full image data is being
transferred to the computer.
by the video source unit and automatically
transferred to the computer.
31
EN