Getting Started - JVC GV-DS2 Instructions Manual

46
EN
JLIP* stands for Joint Level Interface Protocol, a new communication protocol which allows AV
units equipped with a JLIP terminal to be controlled by a personal computer.
* is a registered trademark of JVC.
Personal computer with Microsoft Windows 3.1 or Windows 95
CPU Intel DX4 or faster processor
Minimum RAM requirement: 8 MB
Available Hard Disk space of at least 4 MB (When JLIP Video Capture Software is also
installed, the minimum Hard Disk space required is 8 MB in total.)
Color display capable of at least 640 x 480 pixels, 256 colors
Recommended 1024 x 768, 16.77 Mil colors
1 free serial transmission port, compatible with 9600 bps transmission rate, connectable to
RS-232C with 9 pin serial connector.
Recommended compatible with UART 16550A
Mouse (Windows compatible)
CD-ROM drive
Note : An optional 9 pin serial conversion adapter is required for computers using serial
communication port other than standard 9 pin.
* Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
* Other product and company names included in this instruction manual are trademarks and/or registered
trademarks of their respective holders.
Devices to connect to the VIDEO CAPTURE DOCKING STATION
Player
Digital camcorder: GR-DVXU, GR-DV1U* and GR-DVM1U*
* Attach a Docking Station equipped with a JLIP connector to the GR-DV1U or GR-DVM1U.
Recorder
Recording deck equipped with a JLIP connector
Recording deck equipped with a remote pause jack
Recording deck equipped with neither a JLIP connector nor a remote pause jack
Video printer
Video printer equipped with a JLIP connector: GV-PT1U and GV-PT2U
The JLIP Video Producer Software can be used with the GV-CB1U or GV-DS1U.
(As of September, 1997)
What is JLIP ?
Operating Environment

GETTING STARTED