Overwriting The File - JVC GV-DS2 Instructions Manual

Copying a programmed scene and
transferring it to an other position
DESIGNATE SCENE TO BE
1
COPIED
Click on the scene you want to copy.
STORE DESIGNATED SCENE IN
2
MEMORY
Choose "Copy" from "Edit".
DESIGNATE POSITION
3
Click on the scene number which is
above the position to which the copied
scene is to be transferred.
TRANSFER COPIED SCENE
4
Choose "Paste" from "Edit".
NOTE:
It is not possible to paste a segment above
scene "01".
JLIP VIDEO PRODUCER
File Edit Edit Set-up Window Help
Modify... Ctrl+E
Drop
COUNTER 00:00:00:09F
Cut Ctrl+X
All Clear Del
POWER ON OFF MEMO
Copy Ctrl+C
Paste Ctrl+V
PROGRAM PLAYBACK SCENE
SCENE CUT IN
01 00:05:00:25 00:06:04:16
02 00:06:10:26 00:07:30:15
03 00:07:33:29 00:08:45:15
04 00:08:51:05 00:10:13:26
ELAPSED TIME

Overwriting the file

Saving any previously saved program using the same name. Overwrite erases the previously
saved data for that file.
OVERWRITE FILE
1
After opening a file and modifying counter data (
the JLIP VIDEO PRODUCER window and click on "OK".
•The message "This file already exists. Do you want to overwrite it ?" appears.
To overwrite the file, click on "OK".
ID 06 FILE
START
BF
CUT OUT
BF
B W
EC
00:04:57:17F
IN/OUT
Transferring the programmed scene to
an other position
DESIGNATE SCENE TO BE
1
TRANSFERRED
Click on the scene you want to transfer
and choose "Cut" from "Edit".
•The message "Scene No.
deleted." appears.
To cut, click on "OK".
DESIGNATE POSITION
2
Click on the scene number which is
above the position to which the scene is
to be transferred.
TRANSFER CUT SCENE
3
Choose "Paste" from "Edit".
Modify Edit Points
Enter the new [in] and/or [out] points.
WF
B
IN POINT
W
TC
OUT POINT
pg. 56), choose "Save" from "File" on
will be
00 12 10
: : :
00 16 50
: : :
OK CANCEL
57
EN
12 F
18 F