Video Printer Operation (Gv-Pt1U); Printing - JVC GV-DS2 Instructions Manual

62
EN

Printing

Before printing, perform the procedure listed below.
Connect to image and sound source (
Set VCR to external input.
Set TV to VIDEO mode so that images from video printer appear.
1
BRING UP VIDEO PRINTER
WINDOW
Select "Video Printer" from "Window"
on the JLIP VIDEO PRODUCER window.
•The "Video Printer" window appears.
•To view the buttons on the JLIP VIDEO
PRODUCER window, move the "Video
Printer" window to the right and up
keeping the title bar on the "Video
Printer" window clicked.
2
PLAYBACK
Click on the JLIP VIDEO PRODUCER
window.
•The "Video Printer" window appears
behind the JLIP VIDEO PRODUCER
window.
•To view the "Video Printer" window,
click the title bar labelled "Video
Printer".
The following print styles are also available:
Printing the same scene 4 or 16 times on one sheet. (Multi-Print)
Printing various scenes on the same print sheet. (Multi-Print)
Printing a scene within a scene. (Inset Print)
Storing a selected number of images at short intervals and printing them on one sheet.
(Strobe)
Also refer to the video printer's instruction manual.
JLIP VIDEO PRODUCER
File Edit Set-up Window Window Help
VCR Control
Drop 00:06:38:11F
COUNTER
Video Printer
POWER
ON OFF
PROGRAM PLAYBACK
SCENE CUT IN
ELAPSED TIME

VIDEO PRINTER OPERATION (GV-PT1U)

ID 06 FILE
MEMO
SCENE START
CUT OUT
B W
EC
00:00:00:00F
IN/OUT
pg. 14, 15).
3
STORE SCENE
Click "STORE" on the "Video Printer"
window at the scene you want to print.
•The selected scene is stored in memory
and appears on the TV monitor.
4
PRINT
Insert print paper into the video printer
and print.
•Also refer to the video printer's
instruction manual.
@ @ € € À À @@ @@ €€ €€ ÀÀ ÀÀ
Video Printer
POWER
BF WF
16
B
W
4
TC
OFF
MULTI-PIX
ON OFF POSITION
HIGH LOW
STROBE
STROBE SPEED
SELECTED
ON OFF
SAME
PIX STABILIZER
CONTENT
Aperture Off ! !
ID 20
STORE
EQ
SELECT
SOURCE
MEMORY
CLOSE