Jacuzzi The Quantum Plus Owner's Manual page 21

TROUBLESHOOTING GUIDE
PROBLEM
10. Motor will not start.
(Continued)
11. Motor stops.
12. Air Blower does not operate.
*Note: The skills and tools necessary for the safe repair of this spa require the services
of qualified service personnel. Contact your Jacuzzi Whirlpool Bath dealer.
PROBABLE CAUSE
F. Improper or defective wiring.
G. High temperature safety
switches tripped.
H. Subnormal voltage.
I. Locked shaft or impeller.
J. Motor windings burned out.
K. Defective starting switch
inside motor.
A. Motor overload condition.
B. Selector switch failure.
C. Relay failure.
D. Inadequate supply wiring.
E. High temperature safety
switches tripped.
A. Power off.
B. ACC switch in OFF.
C. House circuit breaker
tripped, no power to
system.
D. ELCB tripped.
E. Faulty motor.
REMEDY
F. *
G. Reset buttons on heater after
water has cooled; see *Note
if switches continue to trip.
H. Call an electrician or your
power company.
I. *
J. *
K. *
A. Let cool for one hour.
Motor overload protector will reset;
if problem persists, see *Note.
B. *
C. *
D. Consult electrician to cor-
rect wiring to unit.
E. Reset buttons on heater after
water has cooled; see *Note
if switches continue to trip.
A. Turn on power at service
panel.
B. Select other function.
C. Reset circuit breaker.
D. Reset ELCB.
E. *
19