Rom Removal - Epson FX-880 Service Manual

Disassembly and Assembly
CN1
Rivet
CBB Screw (3 x 12)
C229 PSB/PSE Board
Lower Case
C229 Main Board
Figure 3-7. Power Supply Board Removal

ROM Removal

1. Follow the disassembly preparation procedures (see page 3-8).
2. Remove the upper housing (see page 3-9).
3. Remove the 5 CBS (M3 × 4) screws and 3 CBB (3 × 12) screws securing the shield cover to the
printer mechanism and lower housing, then remove the shield cover (see page 3-11).
4. Remove the ROM from the C229 main board.
3-14
ESPON FX-880/FX-1180 Service Manual