Epson FX-880 Service Manual page 20

Insertion
Minimum label size
Backing sheet width
Backing sheet length
Backing sheet thickness
Total thickness
Label weight
Quality
Notes:
1. Printing on labels is available only at normal temperatures and humidity.
2. The base sheet for the labels must be continuous paper.
A
B
EPSON FX-880/FX-1180 Service Manual
Table 1-12. Specifications for Continuous Form Labels
Front (push or pull tractor, but preferably pull) or bottom (pull tractor)
See the figure below:
FX-1180: 4 to 16 inches (101.6 to 406.4 mm)
FX-880: 4 to 10 inches (101.6 to 254.0 mm)
4 to 22 inches (101.6 to 558.8 mm)
0.0028 to 0.0035 inches (0.07 to 0.09 mm)
0.0063 to 0.0075 inches (0.16 to 0.19 mm)
2
17 lb (68 g/m
AVERY Continuous Form labels, AVERY Mini-Line labels, or labels of
equal quality
A
B
Figure 1-5. Margins for Continuous Paper
2.5" (63.5 mm)
Label
Figure 1-4. Label
)
A The minimum top and bottom margins (above and
below the perforation) are 0.17 inch (4.2 mm).
B The minimum left and right margins are 0.51 inch (13
mm).
The maximum printable width is 8 inches (203.2 mm) for
the FX-880 and 13.6 inches (345.4 mm) for the FX-1180.
Product Description
Corner Radius 0.1" (2.5 mm)
1-9