Table of Contents
Advertisement
GB
2-04-2002
8:01
C
Pagina 33
4. Care and maintenance of
Caution: Always disconnect the appliance from
mains outlet before performing any cleaning or
maintenance operation.
After the appliance has been used for extraction
cleaning or wet vacuuming, the tools and accessories on
the machine should be rinsed to ensure maximum
hygiene before storing. Clean nozzle, tubes and hose by
vacuuming up a few litres of clean water.
Always empty out the dirty-water tank after use.
If the appliance must be stored away for long periods,
remove all water from the boiler.
After having emptied out the wet/dry tank, remove the
liquid filter, rinse it under running water and dry
thoroughly
The filter must be stored dry to prolong its life.
Exhaust air is filtered by a high-efficiency filter (A) that
captures and retains particles with a size of over 3
microns. When dirty, the filter must be replaced.
B
Filters B and C can be washed when dirty, carefully
dried and reinserted.
It is important to maintain the filters efficiency unimpaired
as they guarantee the optimal functioning of the
machine.
Spare filters are available at your Authorized Service
Centre.
A
Periodically check to see that the floater is moving freely
in its casing, and that wet filter (4) and air filter (7) are in
place and correctly positioned in their seats.
the appliance
33
Advertisement
Table of Contents
