Sharp AR-M208 Service Manual page 28

67-20
Function (Purpose) Used to check the network connection when
the scan option is installed.
Operation/procedure
The network scanner is checked.
When [OK] key is pressed, "Please Send Data" and "READY" are dis-
played, and then ftp is booted from MS-DOS.
Put the file name, and data are transmitted from the PC.
The process is displayed. Check the display.
After completion, the result is displayed.
(It takes a little time to display READY.)
(1) (2)
Sim67-20 SCAN TEST Sim67-20 SCAN TEST
PRESS OK KEY Please Send Data
READY
(Normal end screen) (Abnormal end screen)
Sim67-20 SCAN TEST Sim67-20 SCAN TEST
COMPLETE ERROR
(TEST DATA)
TEST DATA
(Process status)
RECEIVE
TESTING
Pressing [CA] key cancels the simulation resets the operation.
* Execution is inhibited until GDI or PCL board is securely installed.
(Because the board is detected by the software.)
Note: Executable only when PCL and NIC are installed.
(3)
Sim67-20 SCAN TEST
TEST DATA
RECEIVE
AR-M208 SIMULATION 8 - 14