Installation Of Core; Intel ® Processor Serial Number; Power-Saving Function; Peripheral Devices/Cables - Fujitsu DESKPOWER 6000 Series User Manual

I Power-saving function
If the power saving function is triggered during animation is being played, or music recorded or
played, operation of the application becomes unstable. In this case, disable the power-saving
function.
I Peripheral devices/cables
Use a Fujitsu-supplied product for a peripheral device or cable to be connected to the PC.
Some commercially-available peripheral devices or cables cannot be connected to the PC
properly.
I Mouse with scroll (wheel) function
A mouse with the scroll function (PS/2) must be connected to the PC unit.
If the USB keyboard and a mouse with the scroll function (PS/2) are used at the same time, the
mouse may be disabled in the Safe mode of Windows 98.
In this case, disconnect the USB keyboard from the PC unit, perform some operation of the mouse
(ex. clicking), and reconnect the keyboard (the scroll function is not available in the Safe mode of
Windows 98).
I Installation of core
When connecting a cable to the LINE IN connector on the back of the PC unit, install the attached
core onto the cable as follows to reduce unnecessary electric wave emission:
Point
Be careful not to catch the cable in when binding the core.
1 Bind the cable around the core (one round) immediately behind the connector of the
cable to be connected to the PC unit, and bind the core
Core
2 Connect the cable to the connector on the back of the PC unit.
I Intel® processor serial number
Each Intel Pentium III Processor contains an electrically-readable serial number, which can be
used to improve security, and manage information and assets on the web.
The processor serial number can be read using software application. This read function can be
enabled or disabled using BIOS Setup. By default, the function is "disabled".
To enable the function, set [Main]-[Processor serial number] of BIOS Setup to [Enabled].
70
Cable