Problems - Fujitsu DESKPOWER 6000 Series User Manual

1 Problems

This section identifies problems relating to each function.Read wherever applicable.
G The access lamp stays off.
The PC may be faulty. Consult with the Fujitsu Service Center or the store where you purchased
this computer.
G Nothing appears on the display.
Check the following:
G Is the display power switch turned on?
G Is the energy-saving mode set? Move the mouse or press any key.
G Is the display cable connected correctly?
G Is the display cable connected to the outlet?
WARNING
Electric shock
G Are the brightness and contrast controls of the display adjusted correctly? Adjust the screen
using these controls.
G The screen sways.
Is there any substance generating a strong electromagnetic field (ex. TV) near the display? If
any, keep it away from the display.
G The left and right sides of the screen are concealed.
Use the display control button to adjust the horizontal screen size.
G Data cannot be written to or read from a floppy disk.
Check the following:
G Is the floppy disk drive head dirty? If so, use an appropriate cleaning floppy disk to clean the
head.
G Is the floppy disk write-protected? If so, set the write-protect notch of the floppy disk to the
write-enable position.
50
G Be sure to turn the power off before reconnecting the cable.
Otherwise, an electric shock may occur.