Removing Memory Modules - Fujitsu DESKPOWER 6000 Series User Manual

G Removing memory modules
1 Remove the upper cover.
2 Remove the expansion card mounting bracket.
Remove the four screws and lift the bracket vertically.
When an expansion card has been installed, remove the cable from the card and remove the
bracket.
3 Remove the reinforcement bracket.
Remove one screw to remove the bracket.
4 Pull the hooks on both sides of the slot outward and remove the memory module.
Point
Do not pull the hooks too violently. Otherwise, the memory module may jump out of the slot and
become faulty.
42