Table of Contents
Advertisement
6 Resetting
After software installation or when software hangs, the PC must be reset (restarted). This section
explains how to reset (restart) the PC.
Point
Resetting (restarting) the PC clears data in the memory. Save data before resetting (restarting)
the PC.
I Resetting the PC
For Windows 95/98
1
Click the [Start] button, then click [Shut down Windows].
The [Shut down Windows] dialog box appears.
2
Click [Restart the computer] or [Restart], then click [Yes] or [OK].
The PC is reset (restarted).
Point
If the PC cannot be reset (restarted) according to above procedure, proceed as follows:
1
Press the [Ctrl] + [Alt] + [Delete] keys.
The [Abort programs] dialog box appears. Proceed as instructed by the messages.
For Windows NT
1
Click the [Start] button, then click [Shut down].
The [Shut down Windows] dialog box appears.
2
Click [Restart the computer], then click [Yes].
The PC is reset (restarted).
Point
The PC can also be reset (restarted) in the following procedure.
1
Press the [Ctrl] + [Alt] + [Delete] keys.
The [Windows NT security] dialog box appears.
2
Click [Shutdown].
The [Computer shutdown] dialog box appears.
3
Click [Shut down and reboot], then click [OK].
The PC is reset (restarted).
23
Advertisement
Table of Contents
