System expansions
Installing the hard disk carrier
²
Lift the chipcard reader into the system unit (1).
²
Push the chipcard reader into the carrier until it clicks into position (2).
With the chipcard reader connected, no devices may be connected to serial port 2.
i
Installation opening for 2
An installation opening for the 2
means no board slot is occupied.
²
Insert a screwdriver into the opening and break out the pre-stamped installation opening by
moving back and forth.
42
1
nd
serial port is provided on the back of the casing. As a result, this
Installation opening for 2nd serial port
2
nd
serial port
A26361-K516-Z100-1-7619