Installing An Expansion Card - Fujitsu DESKPOWER 6000 Series User Manual

I Installing an expansion card
1 Disconnect the power plug from the outlet.
2 Remove the upper cover.
3 Remove the expansion card mounting bracket.
Remove the four screws and lift the bracket vertically.
When an expansion card has been installed, remove the cable from the card and remove the
bracket.
4 Remove the slot cover.
Remove the screw from the position where the expansion card is installed, and remove the
slot cover.
Point
Keep the removed slot cover.
5 Insert the expansion card into the slot.
Insert the expansion card into the slot, and secure it with the screw removed in Step 4.
46