Reset; Resetting The Pc Via Windows 95/98; Resetting The Pc Via Windows Nt - Fujitsu DESKPOWER 6000 User Manual

Resets
The PC is reset after software is installed or if software fails to run normally. This section
explains how to reset the PC.
Point
Resetting the PC results in memory data being lost. Before resetting, save all necessary data.

Resetting the PC via Windows 95/98

This section explains how to reset the PC via Windows 95/98.
1
Click [Start] and "Shut Down."
The "Shut Down Windows" dialog box appears.
2
Select "Restart the computer?" and then click [OK].
The PC is reset.
Point
If Windows 95/98 does not respond to the keyboard or mouse, reset the PC as follows:
1 Press [Ctrl] + [Alt] + [Delete].
The "Close Program" dialog box appears.
Follow the instructions in this dialog box.

Resetting the PC via Windows NT

This section explains how to reset the PC via Windows NT.
1
Click [Start] and "Shut Down."
The "Shut Down Windows" dialog box appears.
2
Select "Restart the computer?" and click [Yes].
The PC is reset.
Point
The following procedure can also be used to reset the PC:
1 Press [Ctrl] + [Alt] + [Delete].
The "Windows NT Security" dialog box appears.
2 Click [Shut Down].
The "Shut Down Computer" dialog box appears.
3 Select "Switch off power after shut down?" and click [OK].
The PC is reset.
2
13